Table of Contents
Advertisement
ENR-1000 Series System Administrator's Manual
IP Settings
Go to Setup page Network tab click "Network Connection" and select the LAN
interface card that you wish to set up. After setting up, please click "Save" on the bottom right
to save the settings.
LAN Connection Status
Shows "Activated" when connected to a network.
Shows
"Detected Network Cable
Field Name
Connection Type
IP Address
Disconnection" when not connected to a network
Choose one connection type for this LAN port. DHCP and PPPoE
service will assign an IP Address to ENR, and there is no need for
you to define other network information.
Manual: Please obtain a static IP address and other network
information including Subnet Mask, Gateway and DNS server from
your network administrator.
DHCP: Use this connection type if you have a DHCP server on your
network router.
PPPoE: Chose this when your ISP is using PPPoE type DSL line.
Please contact you ISP to get the Username and Password for this
connection.
LAN1 default is Manual; LAN2 default is DHCP.
Fixed IP Address. LAN1 default is 192.168.0.10; LAN2 default is
Auto.
53
Description
www.acti.com
Hide quick links:
Advertisement
Table of Contents
