Table of Contents
Advertisement
ENR-1000 Series System Administrator's Manual
Subnet Mask
Gateway
DNS Setting
Primary DNS Server
Secondary DNS Server
Default Gateway
Change Port Setting
The default connection port used for remote web client to communicate with ENR is 80. To
change it, click "Port Mapping" to modify and save the setting.
Used to define if the destination is in the same subnet. LAN1 default
is 255.255.255.0; LAN2 default is Auto.
A valid gateway setting is essential for data transmission between
different subnets, such as accessing the DNS service or SMTP
server on the Internet. LAN1 default is 192.168.0.254; LAN2
default is Auto.
The DNS server that translates domain names to actual IP
addresses. If this LAN is Manual mode, and you will set an SMTP
server for event notification, be sure to set the Primary DNS and
Secondary DNS. LAN1 default is Manual; LAN2 default is Auto.
Choose the gateway of the LAN card whose network is to connect
with Internet. Default uses
54
LAN2's
setting.
www.acti.com
Hide quick links:
Advertisement
Table of Contents
