Table of Contents
Advertisement
ENR-1000 Series System Administrator's Manual
Event-Recording File Length
Before setting the recording schedule, you may define the length of an event recording. To do
this, configure the following properties shown as below, which will make an event recording
as long as 10+30 second:
Field
Pre-event
Recording
Buffer (sec):
Post-event Recording
Buffer (sec):
Set the Recording Schedule
On the time table
1. Click on the recording mode from
Field
Full-Time Recording
Event Speed Up
Recording
Event Recording
2. Click and drag over the "Time Track" to set time period.
3. Click "Save".
ENR keeps a short cache of video received from devices. If an event
is triggered, ENR will automatically store the pre-event buffer along
with the recording of the event itself.
This will determine how long after the event is triggered should be
included in the event recording file.
Continuously record at the video frame rate you define in Camera
Settings.
Continuously record everything at 1FPS, when an event occurs, the
frame rate will switch to the value you define in Camera Settings,
and automatically switch back to 1FPS after the event ends.
Only events are recorded, at the video frame rate you define in
Camera Settings.
65
Description
Description
www.acti.com
Hide quick links:
Advertisement
Table of Contents
