4 Replacement Procedures
3. Remove the following screws securing the MDC.
•
M2×4B
4. Lift the MDC straight above and remove it from the CN3010 on the system board.
5. Disconnect the MDC cable from the connector on the MDC.
4-18 [CONFIDENTIAL] TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633)
×2
BIND screw
M2×4B BIND
MDC cable
Figure 4-9 Removing the MDC
4.7 MDC/Memory module
MDC
CN3010