4.30 Hinge
Installing the Hinge
To install the hinge, follow the steps below and refer to Figure 4-52 and 4-53.
1. Install the left hinge while engaging the hook and secure it with the following screw.
•
M2.5×6C
2. Install the right hinge while engaging two hooks and secure it with the following
screws.
•
M2.5×6C
•
M2.5×4B
3. Install the LCD mask and lay it down.
CAUTION: When laying the LCD mask down, be careful not to hold the top portion.
4. Secure the LCD mask with the following screws.
•
M2.5×4B
•
M2.5×6C
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-95
Tapping screw
Tapping screw
FLAT HEAD screw
FLAT HEAD screw
Tapping screw
4 Replacement Procedures
×1
×1
×1
×2
×4