Page 1
Fastec Imaging TS3 / TS4 Quick Start Guide Equipment Unpack the camera and assemble the following equipment: 1. TS3 or TS4 camera 2. Camera power adapter with AC power cord, or charged battery inserted in the camera. (Battery is fully charged when the TS3 is shipped from the factory.)
Page 2
Controls and Buttons 1. On/Off Button. This button powers the camera on and off. If the battery is installed and the power adapter is attached, the battery charging dialog will appear (see the section on Power, below). 2. Display Button. The Display Button controls the LCD display on the back of the camera. Pressing the button toggles the Display through several modes: Display on, Display on with Histogram, and Display off.
Page 3
Download images from the image memory to an SD card installed in the SD port in the camera. View or transfer the images using an SD card reader or by inserting the SD card into a built-in SD port in the desired PC. Contact Information Fastec Imaging Corporation 17150 Via Del Campo, Ste.301, San Diego, CA 92127 +1-858-592-2342...