Wall Mount Bracket - Pioneer XY series Installation Manual
Hide thumbs
Also See for XY series:
- Installation manual (43 pages) ,
- User manual (15 pages) ,
- User manual (10 pages)
Table of Contents
Advertisement
3 Rigging And Caster Setting
___________________________________________________________________________________________________________
3.2.6 Wall Mount Bracket
The holes for commercially-available wall mount brackets are provided on the
rear of the XY-81/101/122/152.
Note: Pioneer does not sell wall mount brackets. Please ensure that the
commercially-available wall mount bracket is compatible with the sizes shown
in Table 3-2-6-A
Table 3-2-6-A: Size of the hole and the area for a wall mount bracket to be
attached.
Model
Mounting point
XY-81
M6 X 4
XY-101
XY-122
M8 X 4
XY-152
Procedure
(1)
Remove the four mounting screws pre-inserted in the holes on the rear
of the enclosure. (Fig.3-2-6-A)
(2)
Using bolts included with a commercially-available wall mount bracket,
align the mounting holes on the wall mount bracket with the mounting
points on the XY-81/101/122/152. Tighten the bolts over the following
torque.
XY-81/101: 4.9N·m torque.
XY-122/152: 7N·m torque
(3)
Use the bolts included with the commercially-available wall mount
bracket to attach the bracket to the wall.
(4)
Ensure the commercially-available eyebolt is secured to the rear part of
the top point on the XY-81/101/122/152 safety feature.
Area for a wall mount
bracket to be attached
( W mm x H mm )
50.8 mm x 108 mm
70 mm x 127 mm
Commercially
-available
eyebolt
W mm
H mm
Fig.3-2-6-A
Commercially-available
wall mount bracket
Advertisement
Table of Contents
