Caster - Pioneer XY series Installation Manual
Hide thumbs
Also See for XY series:
- Installation manual (43 pages) ,
- User manual (15 pages) ,
- User manual (10 pages)
Table of Contents
Advertisement
3 Rigging And Caster Setting
___________________________________________________________________________________________________________
3.2.7 Caster
The mounting points for casters to help moving the loudspeakers are on
the rear side of XY-118S/215S/218S.
Part list (CP-XYCS1)
Item Part Name
A
Caster
B
M8 hex head bolt
C
Spring washer
Flat Washer
D
Procedure
(1)
Unscrew the sixteen pre-inserted mounting screws on the rear of
XY-118S/215S/218S. (Fig.3-2-7-A)
Using the four supplied M8 Hex head bolts(B), align the mounting
(2)
points on the rear of the enclosure and the four holes on each
Caster (A). Ensure that both Spring washer(C) and Flat washer(D)
are used - the Flat washer(C) should be in contact with the
Caster(A). Tighten the bolts over 7N·m torque. (Fig.3-2-7-B)
Turn the XY-118S/215S/218S enclosure with its grille up to roll on
(3)
the casters. (Fig.3-2-7-C)
(D)
(C)
(B)
(A)
Fig.3-2-7-B
Qty
Service Part No. Note
4
-
M8 x 30mm (P=1.25)
17
06C005
13mm hex head
17
06D011
M8
17
06D009
M8
NOTE: XY-118S is shown in the illustration.
Required tools
・Screwdriver
・13mm hex spanner
Fig.3-2-7-A
Fig.3-2-7-C
Advertisement
Table of Contents
