System Setting - Pioneer XY series Installation Manual
Hide thumbs
Also See for XY series:
- Installation manual (43 pages) ,
- User manual (15 pages) ,
- User manual (10 pages)
Table of Contents
Advertisement
4 System Configuration
____________________________________________________________________________________________________________
4.2 System setting
Preset
Please see the [Armonia User Guide] of Powersoft for details of how to set and use the Preset and the
Amplifier.
URL:
Please see the Pioneer website for the details of Presets and the specifications of the setting values.
URL:
・The audio quality may vary depending on the environment and the location where the
NOTES:
loudspeakers are placed even though the presets are made optimal for universal use. Check
the sound quality and readjust the DSP, as needed, depending on the location where a
loudspeaker is installed.
・The combination of a Fullrange speaker and a Subwoofer presets are used for the polemount
installation. If other installation methods are used, change the settings of Delay and EQ, etc.
(except the combination with XY-218S)
・The preset for Fullrange speaker and XY-218S is assumed to be used when they are
installed as follows:
A loudspeaker stand is used when the fullrange speaker is installed.
XY-218S is stacked on the floor between the 2 Fullrange speakers.
・The specifications of presets are subject to change without notice.
Connection chart
The details of the Fig 4-2-A to Fig 4-2-M are described in the figure below.
amplifier's output channel No.
Speaker
connect to the channel 1
http://www.powersoft-audio.com/en/
http://www.powersoft-audio.com/en/products/software.html
http://pioneerproaudio.com/en/resources.html
Ch
XY-122
K3DSP
1
Ch
XY-118S
K3DSP
1
Speaker cable
Ch
XY-122
2
Ch
XY-118S
2
Speaker
connect to the channel 2
Advertisement
Table of Contents
