Accessories - Pioneer XY series Installation Manual

Hide thumbs Also See for XY series:

Table of Contents

2 Accessories

WARNING

・

The overhead suspension of loudspeakers is a very serious issue with potentially lethal consequences should anything

go wrong.

Rigging should only be carried out by experienced personnel following safe working practice.

Should you be in any doubt whatsoever, please contact the retailer or dealer from which you purchased this product.

・

When utilising any suspension method, a secondary safety feature must be used. For any suspension method, fit an

eyebolt to any of the rigging points.

A safety steel can then be attached to this and connected to your safety point.

Hardware standby

The following hardware is provided with the XY series products so that commercially-available poles, brackets and other items

can be attached.

(see Table 2-1 and 2-2 "Hardware standby")

・Check to make sure that any commercially available mounting hardware used is enough to support the

Caution

weight of the speaker system.

・If you use any commercially available eyebolt, ensure it is the same size as in the list below and have enough

strength to withstand the weight of the loudspeaker.

・Please follow an instruction manual for a commercially available product for installation and safety measures.

Accessories List

All the supplied accessories for XY series are listed in the following "Accessories List".

(see Table 2-1 and 2-2 "Accessories List")

Please ensure that you read "Section 1: Introduction" and "Section 3.1 - 3.2" fully, and have the product installed by a

professional.

Have the installer carefully follow the installation instructions.

M10 x 30mm, P=1.5, Safe Working Load limits: 1.47[kN] (150[kg]) and more

M8 x 15mm, P=1.25, Safe Working Load limits: 0.785[kN] (80[kg]) and more

Table of Contents