For details on [REC] mode menu settings, refer to P30.
You can adjust the flash output.
Applicable modes:
[s2 EV]/[s1 2/3 EV]/[s1 1/3 EV]/[s1 EV]/[s2/3 EV]/[s1/3 EV]/[0 EV]/[r1/3 EV]/
[r2/3 EV]/[r1 EV]/[r1 1/3 EV]/[r1 2/3 EV]/[r2 EV]
Note
• Refer to P69 for details.
[I.EXPOSURE] (Intelligent exposure adjustment)
For details on [REC] mode menu settings, refer to P30.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
• Even when the [SENSITIVITY] is set to [ISO100]/[ISO125], [SENSITIVITY] may be set higher
than [ISO100]/[ISO125] if the picture is taken with [I.EXPOSURE] set to valid.
• Compensation effect may not be achieved depending on the conditions.
• [
] in the screen turns to yellow when [I.EXPOSURE] is in effect.
• [LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
For details on [REC] mode menu settings, refer to P30.
Enlarging a picture with no picture quality deterioration
Applicable modes:
[OFF]/[ON]
Note
• Refer to P55 for details.
For details on [REC] mode menu settings, refer to P30.
This can enlarge subjects even more than the optical zoom or extra optical zoom.
Applicable modes:
[OFF]/[2t]/[4t]
Note
• Refer to P55 for details.
• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
set to [MODE1].
[FLASH ADJUST.]
[EX. OPT. ZOOM]
) [DIGITAL ZOOM]
Advanced (Recording pictures)
VQT2A73
121