Yamaha FX10X Service Manual page 70

EXHAUST GAS VOLUME ADJUSTMENT (For Europe)

4. Simultaneously press and hold the "SELECT"

and "RESET" buttons, turn the main switch on,

and continue to press the buttons for 8 seconds

• All displays on the meter disappear except the

odometer/tripmeter/engine speed meter displays.

• "dIAG" appears on the odometer/tripmeter/engine

speed meter LCD.

5. Press the "SELECT" button to select the CO

adjustment mode "CO" 1 or the diagnostic

mode "dIAG".

6. After selecting "CO", simultaneously press the

"SELECT" and "RESET" buttons for 2 seconds

or more to activate the selection.

7. Press the "SELECT" and "RESET" buttons to

select a cylinder number 1.

The selected cylinder number appears on the

speedometer LCD.

8. After selecting the cylinder number, simulta-

neously press the "SELECT" and "RESET" but-

tons for 2 seconds or more to activate the

9. Change the CO adjustment volume 1 by press-

ing the "SELECT" and "RESET" buttons.

The CO adjustment volume appears on the odome-

ter/tripmeter/engine speed meter LCD.

• To decrease the CO adjustment volume, press

the "RESET" button.

• To increase the CO adjustment volume, press the

"SELECT" button.

10. Release the "RESET" and "SELECT" buttons to

activate the selection.

11. Turn the main switch to "off" to cancel the mode.

Show Quick Links

Chapters