Receiving Calls; Setup - Linksys SPA-942 Quick Start Manual
Optus voip ip handset
Hide thumbs
Also See for SPA-942:
- User manual (14 pages) ,
- Configuring (10 pages) ,
- Configuration manual (10 pages)
Table of Contents
Advertisement
• To initiate a transfer, press the soft button under xfer during an active call. This places
• Dial the second person's telephone number. When the second person answers, you can
Attended transfer
• To connect the call to the second person, press the soft button under xfer again to complete
note: If you hang up during the call with the second person before pressing xfer, the transfer
is not completed and this only ends the call with the second person.
• To initiate an unattended (blind) transfer, press the soft button under xfer during an
• Dial the second person's telephone number.
• After the second person's phone is ringing, press the soft button under xfer again to
Unattended transfer
note:
• If you hang up before the second call is ringing, the blind transfer will fail and the first person
• If you misdial when calling the second number, press the line button again and you will receive
Accessing the Voice
Access the voice mailbox by pressing the mailbox button, or by dialling the voicemail extension *96.
Mailbox
you will need to subscribe to this service if required.
6. Receiving Calls
• Calls will come into the phone on the first available line.
Multiple Calls on a
• When a call is incoming, the associated line button will flash and the phone will ring.
Multiple Lines
• If there are multiple lines ringing, caller information for each call will display on the LCD screen.
• To end a handset call, hang up the handset.
ending a Call
• To end a speakerphone call, press the speaker button.
• To end a headset call, press the headset button.
dir
soft Button Label
Descriptions
redial
7. setup
1.
Directory
2.
speed Dial
3.
Call History
4.
Ring tone
5.
Preferences
6.
Call forward
the first call on hold and you will hear a dial tone.
have a private conversation with the second person without the first person hearing it.
the transfer. you will be disconnected from the call.
active call. The first call is placed on hold and you will hear a dial tone.
complete the transfer. you will be disconnected from the call.
will be disconnected.
a dial tone. you can then dial the number.
Access the phone's directory.
Displays a list of recently called numbers.
7.
time/Date
8.
Voice Mail
9.
network
10 . Product Info
11.
status
12. Reboot
13. Restart
14. factory Reset
15. Custom Reset
16. set Password
17. LCD Contrast
18. Language
Advertisement
Table of Contents
