Summary of Contents for Bamo GsM 24e
- Page 1 GsM 24e Modem GSM / GPRS INSTRUCTIONS MANUAL Modem GSM / GPRS GsM 24e 248-01 06-03-2013 248 M1 01 D...
- Page 2 1. DESCRIPTION The switching contact is activated by wiring input pin (E1, E2 or E3) with the + pin of the power supply. Connector Micro-Fit 4-pins/M 1: + V DC Connector 2: GND Micro-Fit 2pts/M 3: Input 1(E1) 5: Input 3 (E3) 4: output 1(S1) 6: Input 2 (E2) Front side...
-
Page 3: Starting The Modem
2. STARTING THE MODEM To install the Modem, it is recommended to perform the following operations with the Modem turned off: • Remove the SIM card cover on the rear side Please, check that PIN number has been DISAbLED • •... - Page 4 The configuration of the Modem could be done automatically or manually: 1st method: Automatic configuration through the software GSMSet with a PC 2nd method: Manual configuration: only for advanced users. 4. Automatic configuration using the software SMSet Do not switch on the power before ending the following routine: Install the software GSMSet Connect the serial cable to the PC Connect the serial cable to the MODEM...