Table of Contents
Advertisement
7. Initial setting
Always use FFC function for this camera.
Flat field correction is a function used to improve non-uniform image arising from imperfections
(
contributed by lens, picture element etc.
The following settings are all made by communication command of Hyper terminal (See P.15-18).
Make the setting according to TL-8000C_RS232C communication protocol (P.12 -13 )
Serial Communication Protocol P.10 -13
(Refer to
At Hyper terminal
7-1 Operational setting of the camera
7-1-1 SYNC setting
Sync=N
7-1-2 EXP mode setting
expc= N
expt= N
cfg
The following list is obtained.
)
)
Sets the camera SYNC.
1: External synchronization (Ext Sync)
2: Internal synchronization (Int Sync)
Sets the Exposure control states.
0: Line period exposure
1: Fixed time exposure (value of expt)
2: Pulse width exposure
(Refer to P.14 Exposure control for the detail)
Sets the Exposure time(Fixed value) of the camera.
N:0-255
Unit 6.35 sec
7 / 21
Advertisement
Table of Contents
