Table of Contents
Advertisement
3 - 40 WiNG 4.4 Switch System Reference Guide
3. Refer to the
Redundancy Configuration
updates.
Enable
IP Address
User ID
File Name (With
Path)
Protocol
Password
4. Refer to the
Firmware
located (updated) switch firmware is used with the switch the next time the switch boots.
Enable
IP Address
User ID
File Name (With
Path)
Protocol
Password
Version
5. Select the
Start Update
or firmware facilities.
6. Click the
Apply
7. Click the
Revert
field to enable and define the configuration for automatic cluster file
Select the
Enable
checkbox to allow an automatic cluster file update when a new (updated) file
is detected (upon the boot of the switch) at the specified IP address.
Define the
IP address
of the server where the cluster files reside. If a new version is detected
when the switch is booted, it will be uploaded to the switch and used upon the next boot of the
switch.
Enter the
User ID
required to access the FTP or TFTP server.
Provide the complete and accurate path to the location of the cluster files on the server. This path
must be accurate to ensure that the most recent file is retrieved.
Use the
Protocol
drop-down menu to specify the
FLASH
medium used for the file update from the server. FLASH is the default setting.
Enter the password required to access the server.
field to enable and define the configuration for automatic firmware updates. If enabled, the
Select the
Enable
checkbox to allow an automatic firmware update when a new (updated) version
is detected (upon the boot of the switch) at the specified IP address.
Define the
IP address
of the server where the firmware files reside. If a new version is detected
when the switch is booted, it will be uploaded to the switch and used upon the next boot of the
switch.
Enter the
User ID
required to access the FTP or TFTP server.
Provide the complete and accurate path to the location of the firmware files on the server. This
path must be accurate to ensure that the file is retrieved.
Use the
Protocol
drop-down menu to specify the
FLASH
medium used for the file update from the server. FLASH is the default setting.
Enter the password required to access the server.
Provide the target firmware version to ensure that the switch is upgrading to the intended
baseline.
button to begin the file updates for the enabled switch configuration, cluster configuration,
button to save the changes to the configuration.
button to revert back to the last saved configuration.
FTP, TFTP, HTTP, SFTP,
or resident switch
FTP, TFTP, HTTP, SFTP,
or resident switch
Advertisement
Table of Contents
Troubleshooting
