3.1.11 Removing the 5DVD changer mechanism assembly
(See Figs.21 to 23)
• Prior to performing the following procedures, remove the metal
cover, tuner, video board, rear panel, main board and bridge
board.
(1) From the both sides of the main body, remove the two
screws T attaching the 5DVD changer mechanism assem-
bly to the front panel assembly. (See Figs.21 and 22.)
(2) From the left side of the main body, remove the tie band
bundling the wire and parallel wires. (See Fig.22.)
Reference:
After reassembling, bundle the wire and parallel wires
with the new tie band as before. (See Fig.22.)
(3) Take out the 5DVD changer mechanism assembly from the
main body.
Reference:
When attaching the 5CD changer mechanism assembly,
pass the wires through the sections (m, n) of the plastic
chassis. (See Fig.22.)
(4) From the both and top sides of the 5DVD changer mecha-
nism assembly, remove the two screws U and screw U' at-
taching the main chassis. (See Fig.23.)
Reference:
• Align the projections s of the plastic chassis to the
holes of the main chassis before attaching the screw
U'. (See Fig.23.)
• When attaching the screw U', attach the earth wire
with it. (See Fig.23.)
(5) Take out the main chassis.
(6) From the top side of the 5DVD changer mechanism as-
sembly, remove the three screws V and screw V' attaching
the 5DVD changer mechanism assembly on the plastic
chassis.
Reference:
• When reassembling, align the projections (p, q, r) of the
plastic chassis to the holes of the 5DVD changer mechanism
assembly before attaching the screws V and V'. (See
Fig.23.)
• When attaching the screw V', attach the earth wire with it.
(See Fig.23.)
1-14 (No.MB188)
Front panel assembly
5DVD changer mechanism assembly
T
Fig.21
Front panel assembly
Tie band
5DVD changer
mechanism assembly
m
Fig.22
5DVD changer
U
mechanism assembly
V
Main chassis
V
U
r
V
Fig.23
Wires
T
n
V
p
Plastic chassis
s
U'
s
Earth wire
V'
q