I To set the clock
1. Press "CLOCK button".
is displayed.
blinks.
2. Press "TIMER setting button"
to set the clock to the present
time.
Holding down "
idly increases or decreases the time dis-
play.
3. Press "CLOCK button".
blinks.
I Turn the breaker ON
• Turning ON the breaker opens the flap,
then closes it again. (This is a normal
procedure.)
NOTE
I I I I Tips for saving energy
•
Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
•
Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating)
effect.
•
Clogged air filters cause inefficient operation and waste energy. Clean them once in about every two weeks.
I I I I Please note
•
The air conditioner always consumes 15-35 watts of electricity even while it is not operating.
•
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker OFF.
•
Use the air conditioner in the following conditions.
Mode
Operating conditions
COOL
Outdoor temperature: –10 to 46 °C
Indoor temperature: 18 to 32 °C
Indoor humidity: 80% max.
HEAT
Outdoor temperature: –15 to 21 °C
Indoor temperature: 14 to 28 °C
DRY
Outdoor temperature: –10 to 46 °C
Indoor temperature: 18 to 32 °C
Indoor humidity: 80% max.
•
Operation outside this humidity or temperature range may cause a safety device to disable the system.
" or "
" button rap-
If operation is continued out of this range
•
A safety device may work to stop the operation.
(In multi system, it may work to stop the operation of the outdoor unit only.)
•
Condensation may occur on the indoor unit and drip.
•
A safety device may work to stop the operation.
•
A safety device may work to stop the operation.
•
Condensation may occur on the indoor unit and drip.
C
ON/OFF
TEMP
POWERFUL
MODE
FAN
SWING
ON
CANCEL
OFF
TIMER
Recommended temperature setting
For cooling:26°C – 28°C
For heating:20°C – 24°C
2
1.3
9