Table of Contents
Advertisement
Available languages
Available languages
Problem
The dishes are wet.
The dishes are wet and matt.
Activating the rinse aid dispenser
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold buttons (4) and (5) at the same time until the indicators of buttons (3),
(4) and (5) flash.
4. Release buttons (4) and (5).
5. Press button (4).
• The indicators of buttons (3) and (5) go off
• The indicator of button (4) continues to flash
• The display shows the setting of the rinse aid dispenser.
6. Press button (4) to change the setting.
7. Deactivate the appliance to confirm.
TECHNICAL DATA
Dimensions
Water supply pressure
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
www.preciz.hu
Possible cause
The detergent can be the
cause.
The washing programme was
without a drying phase or with
a decreased drying phase.
The rinse aid dispenser is empŠ
ty.
The multitab function is on
(this function automatically
deactivates the rinse aid disŠ
penser).
Rinse aid dispenser is off.
Rinse aid dispenser is on.
Width
Height
Depth
Minimum
Maximum
Cold water or hot water
Place settings
Technical data
Possible solution
Use a different brand of deterŠ
gent.
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
818 - 898 mm
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
maximum 60 °C
43
446 mm
550 mm
9
Advertisement
Table of Contents
