free hit counter

Service Port; Dhcp Server - Cisco SVP2000P User Manual

Business poe ip phone
Table of Contents

Advertisement

Voice VLAN ID as the tag, but the data packets will not take the VLAN tag.
5) If Disable the VLAN, regardless to set the Voice/Data VLAN differentiated or not, all packets will not take the VLAN tag;
If enable the DiffServ, all packets will only take the DiffServ value.
6) One must to notice, enable the VLAN ID Check Enable that is default, If enable it, the phone will match the VLAN ID
strictly. When others' VLAN ID not match with us, the packets will discard. Contrarily, the phone will accept the
packets with the distinct VLAN ID.
7) You must gain the IP with the Static mode when you set VLAN, otherwise can't gain the IP in the VLAN and also can not
dial with point to point.

4.3.2.4. Service Port

You can set the port of telnet/HTTP/RTP by this page.
Field name
HTTP Port
Telnet Port
RTP Initial Port
RTP Port Quantity
Notice:
1)You need save the configuration and reboot the phone after set this page.
2)If you modify the port of Telnet and HTTP, you would better set the value more than 1024 because the port value less
than 1024 is system port reserved.
3)if you set 0 for the HTTP port, it will disable HTTP service.

4.3.2.5. DHCP SERVER

S T E P H E N T E C H N O L O G I E S C O . , L I M I T E D
T e l : + 8 6 7 5 5 8 9 3 5 2 6 0 6 / F a x : + 8 6 7 5 5 8 9 3 5 2 6 1 2 / E m a i l : S u p p o r t @ s t e p h e n - t e l e . c o m / U r l : w w w . s t e p h e n - t e l e . c o m
set web browse port, the default is 80 port,if you want to enhance system safety,you'd better
change it into non-80 standard port
Example: The IP address is 192.168.1.70. and the port value is 8090, the accessing address is
http://192.168.1.70:8090
Set Telnet Port, the default is 23. You can change the value into others.
Example:
The IP address is 192.168.1.70. the telnet port value is 8023, the accessing address is telnet
192.168.1.70 8023
Set the RTP Initial Port. It is dynamic allocation.
Set the maximum quantity of RTP Port, the default is 200.
/ 5 / F , B u i l d i n g N O . 1 , T o n g X i n I n d u s t r y Z o n e , H e n g G a n g , L o n g G a n g , S h e n z h e n , G . D , C h i n a , 5 1 8 1 1 5
S V P 2 0 0 0 P P B u s i n e s s P O E I P P h o n e U s e r M a n u a l
SERVICE PORT
explanation
- 2 1 -

Advertisement

Table of Contents
loading