Table of Contents
Advertisement
Mechanical Instructions (continued)
Figure 4-5 Bottom catches 40" and 46" sets -2-
It is advised to lay the set with front facing down before
executing this operation.
1. Remove all screws from the rear cover.
2. Use a round rod (diameter 2 mm) and insert it in one of the
holes [1].
3. Push the catch located inside the rear cover away by
inserting the rod [2] through the hole and lifting the rear
cover at the same time.
4. Repeat the same procedure on the other hole.
4.3.2
Speakers
Tweeters
Each tweeter unit is mounted with one screw.
When defective, replace the whole unit.
Subwoofer
The central subwoofer is located in the centre of the set and is
secured by two bosses.
When defective, replace the whole unit.
4.3.3
Mains Switch
Refer to
Figure 4-6
for details.
1
Figure 4-6 Mains switch
The mains switch is mounted on a plastic subframe and can be
removed without removing the subframe.
1. Use a screwdriver and push the switch out of its casing [1].
2. Unplug the connectors [2].
When defective, replace the whole unit.
4.3.4
Main Power Supply
Refer to
Figure 4-7
for details.
2
19100_049_110216.ep s
110315
19100_047_110216.eps
110315
2
2
Figure 4-7 Main Power Supply
1. Unplug all connectors [1].
2. Remove the fixation screws [2].
3. Take the board out.
When defective, replace the whole unit.
4.3.5
Small Signal Board (SSB)
Refer to
Figure 4-8
for details.
2
1
2
2
Figure 4-8 SSB
1. Unplug all connectors [1].
2. Remove the fixation screws [2].
3. Take the board out.
When remounting, ensure that the side shielding [3] is
positioned correctly.
27
LC-32LE63x
LC-40LE63x
LC-46LE63x
1
2
1
2
1
19100_050_110216.eps
110216
2
2
2
1
19100_051_110216.eps
110216
Hide quick links:
Advertisement
Table of Contents
