Table of Contents
Advertisement
WA603DE & WA653DE
Fat AP Configuration Guide
2. Configure common parameters according to
Table 2-1 Description of common parameters
Parameter
Radio Network
Wireless Mode
Channel
Channel Width
Country Code
AeroScout RFID
tag detection
3. (Optional) Click Edit Common Settings in the Advanced Settings area and configure the
parameters as shown in
Figure 2-3 Configuring advanced parameters
Table 2-2 Description of advanced parameters
Parameter
Transmit Power
Issue 02 (2012-04-19)
Description
Name of the wireless network. The name cannot exceed 32 characters.
The default name is Radio 2.4G or Radio 5G.
Wireless mode. A single-frequency AP can only use 2.4 GHz, and
dual-frequency AP can use either 2.4 GHz or 5 GHz.
Wireless channel. Select SmartSelect or any channel.
Channel bandwidth. Select 20 MHz or 40 MHz.
Name of the country where the AP is used.
Whether to detect the AeroScout RFID tag. To detect the tag, select
Enabled. By default, Disabled is selected.
Figure 2-3
according to
Description
Transmit power of wireless signals. The options are as follows:
Full: full transmission power
Half: half of the transmission power
Quarter: a quarter of the transmission power
Eighth: eighth of the transmission power
Minimum: minimum power
The default value is Full.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Table
2-1.
Table
2-2.
2 Basic Configuration
5
Hide quick links:
Advertisement
Table of Contents
