Table of Contents
Advertisement
WA603DE & WA653DE
Fat AP Configuration Guide
Parameter
Protection Mode
4. Click Update Settings to save the settings.
----End
2.3.2 Configuring Specific Wireless Parameters
1. Click a Wireless # tab page, as shown in
Figure 2-4 Configuring specific wireless parameters
2. (Optional) Select Enabled for Wireless Availability and Broadcast SSID.
3. Enter a wireless network name in the SSID field to identify the wireless network. For
example, huawei Wireless AP.
Issue 02 (2012-04-19)
Description
Whether to control when an 802.11 device can communicate with
other devices.
If a protection mode is enabled, the interaction between 802.11b
and 802.11g devices is enhanced while the network performance
may be affected. The options are as follows:
Here, CTS is short for Clear To Send and RTS is short for Request
To Send.
The symbol # represents 1 to 8 for a single-frequency AP and 1 to 16 for a dual-frequency AP.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
Disabled: no protection mode is used.
CTS-only: If this option is selected, all the destination devices
are forced to receive data when the AP sends data out.
RTS-CTS: If this option is selected, the data sending and
receiving devices are forced to confirm data exchange after a
data transmission event is completed and before another
transmission event occurs.
Figure
2-4.
2 Basic Configuration
6
Hide quick links:
Advertisement
Table of Contents
