Table of Contents
Advertisement
WA603DE & WA653DE
Fat AP Configuration Guide
Parameter
RTS/CTS Threshold
2. Click Update Settings to save the settings.
3. Click Go back to Wireless Configuration.
----End
3.3.2 Configuring the Data Transmission Rate
To ensure fair access to network resources, the transmission rates of devices need be limited.
By default, the rate limiting function is disabled. If you enable the rate limiting function, the
traffic rate of each device is limited in both the downlink and uplink according to the traffic
policy.
To configure the data transmission rate, proceed as follows:
1. Click Edit Settings in the Rate Limiting field, as shown in
The page shown in
Figure 3-9 Configuring the data transmission rate
Issue 02 (2012-04-19)
Description
Minimum packet size when the protection mode RTS-CTS is used.
Network collisions may occur due to high usage of network
resources. You can adjust the transmit byte segment to prevent
network collisions.
Narrow down the transmit byte segment to improve the
retransmission rate when multiple users are associated.
Extend the transmit byte segment to reduce excessive network
overheads that are caused by sending a great number of frames,
which improves the network usage.
Usually, select the transmit byte segment according to the presence
of network collisions.
The value ranges from 256 KB to 2346 KB. The default value is
2346 KB.
Figure 3-9
is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3 Service Configuration
Figure
3-7.
14
Hide quick links:
Advertisement
Table of Contents
