Restoring The Factory Default Settings - Huawei WA603DE Configuration Manual

Table of Contents

WA603DE & WA653DE

Fat AP Configuration Guide

Figure 4-3 Restarting the AP

2. Click Reboot Now.

You are automatically logged out of the AP.

3. Several minutes later, if you can log in to the AP, the AP is successfully restarted.

----End

4.3 Restoring the Factory Default Settings

To restore the AP's factory default settings, proceed as follows:

1. Choose Maintenance > Reboot/Reset from the left navigation tree.

The page shown in

Issue 02 (2012-04-19)

When an AP is connected to a computer and configured with the Wi-Fi function, do not

restore the AP's factory default settings unless you are assisted by Huawei technical

support engineers or network administrators.

Restoring the AP's factory default settings in Web mode will remove all the current

settings of the AP and disconnect the AP from the wireless network.

Figure 4-4

Huawei Proprietary and Confidential

is displayed.

4 Upgrade and Maintenance

Table of Contents

Show Quick Links

Table of Contents