Outline; Overall Configuration - Kenwood TS-480HX Setting Manual

Kenwood network command system

Hide thumbs Also See for TS-480HX:

Table of Contents

3. Outline

Remote Station

(Operator)

(In this diagram, the modem, router, and hub have been omitted.)

As shown in the diagram, the configuration uses a host station (where the transceiver is

installed; this is called the "transmitter" in the Radio Act) and a remote station (which

performs the remote operations; this is called the "operator" in the Radio Act). A PC is

connected to both, and the PCs are connected to each other via the network.

The transceiver connected to the PC to which the ARHP-10 has been installed on the host

station is operated using the ARCP-480, which has been installed on the remote station

PC. Furthermore, transmitted and received audio for the transceiver on the host station

can be transmitted and received using the ARVP-10 to and from the microphone and

speaker connected to the PC sound device on the remote station.

LAN

Fig. 3.1.1: Example of a home LAN configuration

Host Station

(Transmitter)

TS-480

Table of Contents

Show Quick Links

Table of Contents