Table of Contents
Advertisement
Battery Charger Help
The following is intended as an aid in determining whether the battery pack or the charger may be malfunctioning:
Issue
Battery pack does not fit in charging
pocket.
No battery pack in charger, but any
of the LEDs are on.
Charger is plugged into a live outlet,
battery pack is inserted, but RED
LED is OFF and no other LEDs are
on, or all LEDs are off.
Charger is plugged into a live outlet,
battery pack is inserted, but RED
LED is OFF and no other LEDs are
on, or all LEDs are off.
Charger is plugged into a live outlet,
battery pack is inserted, but RED
LED is OFF and no other LEDs are
on, or all LEDs are off.
When you first put a fully charged
battery pack in the charging pocket,
the RED LED comes on, indicating
the battery pack is charging.
LED is flashing RED at any pocket.
LED is flashing RED at any pocket.
LED is flashing RED at any pocket.
8 - 8
Cause
Different manufacturer's battery pack,
or there is an object in the charging
pocket.
Dirt or foreign objects are in the
charging pocket.
Battery pack is not making contact with
battery charge terminals in the
charging pocket.
Faulty battery pack.
New battery pack, same result.
During the first few minutes, the battery
charger checks the battery pack for
correct voltage and charge state.
During this time the LED is RED and is
continuously ON. After charging is
complete, the LED is GREEN.
Current could not be sourced through
the battery pack due to age,
exhaustion or damage to the cell(s).
The battery pack does not
communicate with the charger.
The charger's timeout period has
expired.
The battery pack voltage has not
reached 4.2V within the timeout period
and the charger has timed out.
Solution
Check if the Bluetooth Ring Scanner
battery pack has Honeywell part number
8650376BATTERY/161987-0001 on the
label. If not, do not use.
Remove the object from the charging
pocket.
Unplug charger from AC supply. Remove
any dirt or foreign objects from the
charging pocket. If the LEDs continue to
remain ON, the charger may be defective.
Return charger to an authorized
Honeywell service center.
Push battery pack in firmly. Do not "slam"
the battery pack into the charging pocket.
Replace battery pack.
Contact
Customer Support
for replacement options.
There is nothing wrong with the battery
pack or charger.
Do not "top off" a fully charged battery
pack by repeatedly placing it in the
charging pocket. The battery pack may
overheat and be damaged.
Contact
Customer Support
for battery pack replacement options.
Make sure that the battery pack
temperature is within specification and
retry charging. Contact
Customer
Support
(page 10-1) if problem repeats,
for battery pack replacement options.
Contact
Customer Support
for battery pack replacement options.
(page 10-1)
(page 10-1)
(page 10-1)
- Quick Links:
- Pairing Bluetooth Devices
Hide quick links:
Advertisement
Table of Contents
