Table of Contents
Advertisement
Trigger Mode
Note: The Bluetooth Ring Scanner Module with a ring scanner is designed to be operated in Host Trigger Mode. For best
results leave the Trigger Mode default value unchanged for these devices.
Use this parameter to determine when the laser is activated and decoding begins, how long the laser remains on and what
determines the cessation of the laser scan and decode process.
Trigger Mode
Level
Pulse
Continuous
Blinking
Host (default)
Select a trigger mode by scanning the appropriate bar code. If you wish to change your selection, scan Cancel.
Level
Pulse
Continuous
Function
A trigger pull or Scan button press activates the laser and decode processing. The laser
remains on and decode processing continues until a trigger release, a valid decode or the
Laser On Time-out is reached.
A trigger pull or Scan button press activates the laser and decode processing. The laser
remains on and decode processing continues until a valid decode, or the Laser On Time-out
is reached.
The laser is always on and decoding. See Also:
(page 4-23)
This trigger mode is used for triggerless scanning operations. Scanning range is reduced in
this mode. This mode cannot be used with scanners that support an aim mode.
Triggering signal comes from a host command. Any actual trigger pull or Scan button press
will be interpreted by the scanner engine as a Level triggering option.
Time-out Between Decodes, Same Symbol
4 - 25
- Quick Links:
- Pairing Bluetooth Devices
Hide quick links:
Advertisement
Table of Contents
