GNR-3000 System Administrator's Manual
Hard Disk Installation
For video recordings, you should install at least ONE certified 3.5-inch SATA hard disk. Be
sure to use the hard disk models ACTi tested to be compatible with GNR-3000. You may find
the certified models via http://www.acti.com/hddselector. It is strongly recommended that you
use hard disks of the same model and capacity.
The actual necessary space depends on number of devices, recording and event rules
settings. To get an approximate value, you may use the software tool Bandwidth & Storage
Calculator - http://www.acti.com/storagecalculator.
You can install up to four disks in to Storage Disk Bays. During the installation, please avoid
removing the
System Disk
Bay.
Repeat Step 1~3 to finish installing all the storage disks.
Step 1: Remove the Tray
Slide the Lock Tab up, the Hinge Tab will pop out by itself.
Pull the Hinge Tab to 90 degrees from the front, and then pull out the tray.
www.acti.com
19