Aims Handset - AGA GC3 (P/F) User Instructions

Three oven gas fired power flue cooker with aims

Hide thumbs Also See for GC3 (P/F):

Table of Contents

AIMS is a sophiscated program, which allows you to adjust the temperature of your AGA to

suit your household lifestyle. It is supplied pre-set with two active 'Normal' periods each day. In

this mode the AGA will be at normal temperature to cook breakfast in the morning, drop to a

lower heat during the day then back to normal temperature to prepare dinner in the evening.

After dinner the temperature goes to 'Slumber' mode for overnight. The pre-settings can be

adjusted, see following pages.

Handset can be wall mounted as described below.

Remove backplate from the rear of the Handset by sliding down with hand and away from

the Handset (See Fig. 14).

Select the site for the handset and use the backplate to mark the position of fixing holes.

Avoid mounting handset on the wall behind the AGA.

Drill 6mm dia. holes with masonry drill for the rawplugs.

Use rawplugs and screws supplied to fix the backplate to the wall (See Fig. 15).

Stick the round self adhesive label supplied to the inside of the backplate to cover the fixing

screw heads.

Fit the Handset on to the backplate by locating the tag on to the slot in backplate as

shown (See Fig. 16).

Fig. 14

AIMS HANDSET

Fig. 15

Fig. 16

Table of Contents

Show Quick Links

Table of Contents