free hit counter
  1. Manuals
  2. Brands
  3. AGA Manuals
  4. Cookers
  5. GC3 (P/F)
  6. User instructions

Aims Controls; Aims Set-Up - AGA GC3 (P/F) User Instructions

Three oven gas fired power flue cooker with aims
Hide thumbs Also See for GC3 (P/F):
Table of Contents

Advertisement

AIMS (AGA INTELLIGENT MANAGEMENT SYSTEM)
Fig. 17
1. Connect the electricity supply and the gas supply.
2. Set the control knob on the base unit to manual
3. To light the burner follow the lighting procedure (See Pages 5 - 7).
4. It is recommended that the cooker is run on the
before switching to AIMS (automatic control).
5. When the normal temperature has been set within the black band, it should not be necessary
to alter the temperature control again.
REMEMBER: If adjustment is made, to leave the cooker to stand for at least 4 hours before
attempting further adjustment.
6. The cooker can now be switched to AIMS (automatic control), by turning the control knob from
the Manual setting to the AIMS setting.
7. The AIMS hand set can then be used to programme the required settings (see AIMS
automatic control) instructions.
The handset is designed to operate within the kitchen area.
When transferring information from or to the controller always operate the handset in
front of the cooker, this gives the strongest communication signal.
If the handset indicates 'OFFLINE', press the back button
communication link between the cooker and handset.
Should the handset continue to show 'OFFLINE' , allow one minute for the handset to
"automatically" reconnect itself with the cooker.
The handset has 10 buttons and a display screen.
NOTE: If the AIMS handset is unused for an extended period of time, the display screen will
automatically turn OFF to conserve battery power. The controller is designed to be operated
within the kitchen area.
Press firmly any button on the handset to turn the display back on, and the Information (main
menu) screen is automatically displayed.
CONTROLS

AIMS SET-UP

AIMS CONTROLLER HANDSET
13
(See Fig. 17)
Normal Manual setting for two days,
firmly, this will activate the
DESN 515484
Show Quick Links

Hide quick links:

Advertisement

Table of Contents
loading

Related Manuals for AGA GC3 (P/F)

Related Content for AGA GC3 (P/F)