03 SERIES ADVANCE SWIVEL PUSHCHAIR Dear Customer, Thank you for choosing one of the Mamas & Papas 03 range of pushchairs. The 03 range of pushchairs combine the rugged features of a three-wheeled pushchair with the design, comfort and style expected of Mamas & Papas. These pushchairs look at home in the high streets of a city or on the lanes and tracks in the countryside.
PRODUCT INFORMATION This pushchair has been designed and tested to comply with the latest British safety standards. • This pushchair is designed for children from birth up to 15kgs (3 years of age approx) • The pushchair comes equipped with a five-point harness. Always use the harness when your child is in the seat unit •...
INSTRUCTIONS FOR SAFE USE • WARNING: A CHILD’S SAFETY IS YOUR RESPONSIBILITY. • NEVER LEAVE YOUR CHILD UNATTENDED AT ANY TIME. • Always ensure that your pushchair is fully erect and all locking clips are engaged. (Take particular care if the PVC Raincover is fitted. Check that it is not entangled or preventing the locking mechanism from functioning correctly).
03 SERIES ADVANCE SWIVEL PUSHCHAIR Handle Hood Footmuff bars Not all models of the 03 pushchairs are supplied with a footmuff. For more Hood attachment information please consult your retailer. point Safety harness Bumper bar Adjustable Legrest Rear wheel locking button Footrest Apron Basket...
OPENING THE PUSHCHAIR FOR ASSEMBLY To open the pushchair, grip the centre of the handle and push the locking catch off the stud on the left side of the frame. Grip the middle of the handle. Place a foot on the rear axle, to one side of the brake pedal and lift the handle upwards...
FITTING THE WHEELS Fitting the rear wheels: Slot the pin on the wheel into the hole in the end of the rear axle. Release the button once you have pushed the pin in as far as it will go. Test the wheel is correctly fitted by attempting to pull it off again.
SELECTING LOCK OR UNLOCK FOR THE FRONT WHEEL The front wheel can be used in either the locked or unlocked (can swivel through 360º) mode. To unlock the wheel, turn the knob on the front of the pushchair clockwise to the unlock position.
FITTING THE BUMPER BAR Align the ends of the bumper bars with the ends of the armrests. Firmly push the bumper bar as far onto the ends of the armrests as it will go. Always check that the bumper bar has locked into position.
FITTING THE HOOD Fitting the hood: Push the tabs on the ends of the hood pivots into the holes in the back of the armrests. Fasten the press studs on the side flaps (1) of the hood to the studs on the sides of the backrest.
OPERATING THE BRAKES Locking the brakes: To apply the brakes press the brake pedal downwards as far as it will go as shown in the diagram. Do not use excessive force when applying the brakes. Always check that the brakes have fully engaged by rocking the pushchair backwards and forwards.
ADJUSTING THE BACKREST To lower the backrest: Pull the end of the webbing strap at the rear of the backrest off the velcro strip. Grip the end of the locking buckle on the webbing strap and pull outwards whilst feeding the webbing through it.
USING AND ADJUSTING THE SAFETY HARNESS IMPORTANT: Every time you place your child in the pushchair or whenever you alter the position of the backrest always check that the harness is correctly fitted and adjusted using the shoulder and waist strap buckles. Tighten the harness until it fits snugly around your child.
FITTING THE FOOTMUFF Not all models of the 03 pushchairs are supplied with a footmuff. For more information please consult your retailer. Before fitting the footmuff, unfasten the harness and unclip the shoulder straps from the waist straps of the harness.
FITTING THE APRON Not all models of the 03 pushchairs are supplied with an apron. For more information please consult your retailer. Fasten the zip on the bottom of the apron to the front edge of the footrest cover. Push the top of the apron under the bumper bar.
FOLDING THE PUSHCHAIR Important: Before folding the pushchair ensure that the brakes are applied and the front wheel is locked. Slide the finger button on the handle twist grip sideways and hold whilst rotating the twist grip around as far as it will go.
OPENING THE PUSHCHAIR Ensure the rear brake is locked, see page 10. To open the pushchair, grip the centre of the handle and push the locking catch off the stud behind the left wheel. Grip the middle of the handle and lift upwards. Continue to lift the handle upwards until the frame is fully open and the locks...
REMOVING THE FABRIC COVER Unfasten the velcro pads (A) all of the elastic straps and hooks (B),on the underside of the seat. Push the buckles on the ends of the crotch strap and D-rings (C) through the slots in the seat base. Unfasten the press studs (A) and velcro pads (B) holding the fabric onto...
CARE & MAINTENANCE Your pushchair deserves careful handling and requires regular maintenance. • Regularly check that the safety harness is correctly fitted and that the webbing has not become frayed or damaged. If the harness is damaged, we recommend that a new one is fitted. For more information contact our Customer Care Helpline on:01484 438222.