Table of Contents
Advertisement
System Control
Scan
Scanning output:
You can set the image size to a VGA resolution to accommodate
older applications that require a smaller image size. When Image
VGA is set to On, the resultant image is 640x480 pixels. When
Image VGA is Off, the image is 752x480 pixels.
Scanning mode:
Manual/Serial Trigger Mode
When in manual trigger mode, the scanner scans until a barcode is
read, or until the hardware trigger is released.
When in serial mode, the scanner scans until a barcode has been
read or until the deactivate command is sent. In serial mode, the
scanner can also be set to turn itself off after a specified time has
elapsed (see
Read
Time-Out, which follows).
Read Time-Out
Use this selection to set a time-out (in milliseconds) of the scanner's
trigger if the scanner is in manual trigger mode. Once the scanner
has timed out, you can activate the scanner by
pressing the trigger. After scanning the Read Time-Out barcode,
set the time-out duration (from 0-300,000 milliseconds) by
scanning digits from the inside back cover, then scanning Save.
Default = 0 (infinite, or no time-out).
18
Advertisement
Table of Contents
