Table of Contents
Advertisement
Print Contrast Weight
Print Contrast Weight is used to adjust the way the scanner reads
Matrix symbols. If an scanner will be seeing consistently heavily
printed matrix symbols, then a Print Contrast Weight of 6 may
improve the reading performance. For consistently light printing, a
Print Contrast Weight of 2 may help. After scanning the Set Print
Contrast Weight barcode, set the Print Contrast Weight (from 1-7)
by scanning digits from the inside back cover, then scanning Save.
Default = 4.
Print Contrast Weight
Set Print Contrast Weight
Video Reverse
Video Reverse is used to allow the scanner to read barcodes that are
inverted. The "Off" barcode below is an example of this type of
barcode. If additional menuing is required, Video Reverse must be
disabled to read the menu barcodes and then re-enabled after
menuing is completed.
Note: Images downloaded from the unit will not be reversed. This is
a setting for decoding only.
Video Reverse
On
*Default
40
Advertisement
Table of Contents
