Table of Contents
Advertisement
Introduction
This scanner will automatically scan a barcode at a distance of 3 to 8
inches from the symbol when the trigger is pulled. The scanner is
programmed by scanning barcodes from the manual when viewed on
the screen at 200% or more magnification from the PDF. Successful
scanning shall be obtained by tilting the scanner with respect to the
barcode to avoid direct reflections that impair reading performance.
Installation and Setup
1.Connect the USB cable between scanner and PC.
2.To enable USB keyboard emulation, scan the appropriate barcode
below:
USB HID (PC)
USB HID (MAC)
3.If the scanner does not operate properly, remove the scanner from the
USB port and plug it into another port after scanning one of the USB
HID barcodes above.
4.If the scanner still does not operate properly, remove the cable from
the PC and pull the cable out of the scanner. Reinsert the cable in the
scanner.
5
Advertisement
Table of Contents
