5 - 2
DS6878 Product Reference Guide
Scanning Sequence Examples
In most cases scanning one bar code sets the parameter value. For example, to set the beeper tone to high, scan
the High Frequency (beeper tone) bar code listed under
fast warble beep and the LED turns green, signifying a successful parameter entry.
Other parameters require scanning several bar codes. See these parameter descriptions for this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
User Preferences/Miscellaneous Option Parameter Defaults
Table 5-1
lists the defaults for preferences parameters. To change the default values:
•
Scan the appropriate bar codes in this guide. These new values replace the standard default values in
memory. To recall the default parameter values, scan the
•
Configure the digital scanner using the 123Scan
NOTE See
miscellaneous default parameters.
User Preferences Parameter Defaults
Table 5-1
User Preferences
Set Default Parameter
Parameter Bar Code Scanning
Beep After Good Decode
Suppress Power Up Beeps
Beeper Tone
Beeper Volume
Beeper Duration
Beep on Insertion
Batch Mode
Hand-Held Trigger Mode
Hands-Free Mode
Presentation Performance Mode
Appendix A, Standard Default Parameters
Parameter
Beeper Tone on page
Default Parameters on page
2
configuration program (see
for all user preferences, hosts, symbologies, and
Parameter
Default
Number
Set Defaults
ECh
Enable
38h
Enable
F1h D1h
Do Not Suppress
91h
Medium
8Ch
High
F1 74h
Medium
F0h 20h
Enabled
F1h 20h
Normal (Do Not Batch
Data)
8Ah
Level
F1h 76h
Enable
F1h 8Ah
Standard
5-8. The digital scanner issues a
5-5.
123Scan2 on page
13-1).
Page
Number
5-5
5-6
5-6
5-7
5-8
5-9
5-10
5-10
5-11
5-13
5-14
5-15