Harman XXV Owner's Manual page 12

Hide thumbs Also See for XXV:

Fig. 16

#7 Installing into an existing chimney

using 3" pl vent in combination with

6" or 8" single or double wall stove

pipe.

This method allows the installer to use 6" or 8"

single and double wall stove pipe ( sealed seam not

snap lock ) and

an existing masonry or class A chimney to vent the

stove.

The stove must use a pl type pellet vent and 90 degree

elbow to start at the stove connector and then use

the approved pipe adapter to connect to the size of

vent that continues into the chimney connector.

Support of the assembly must follow any pipe and

connector manufacturers recommendations

Pipe manufacturer clearance to combustibles,

NFPA and or any local codes must be followed for

this type of installation. Be sure to check with the

pipe manufacturer for clearance to combustibles.

#8 Installing through the ceiling

Through the ceiling vent, follow PLvent

manufacturers recommendations when using a wall

or ceiling pass through. Note: Do not place joints

within wall pass-throughs.

insulation or

er combustible

terials

are

(See Page 6 for

comer installation

XXV Pellet Stove