Harman XXV Owner's Manual page 21

Hide thumbs Also See for XXV:

Fig. 31

The room sensol- is a small temperature sen-

sor on the end of a 60" gray wire. This sensor is

installed much like a standard wall thermostat. Be-

cause it is so small, it can be hidden along the trim

of a doorway or even up the leg of a coffee table.

There is a remote room sensor port on the rear of

the unit for easy external connection. Use standard

18-2 thermostat wire to extend the distance to the

desired location (100' maximum). The room sen-

Fig. 32

sor should be installed in the location where you want

to control the temperature.

In most installations locating the room sensor

behind the stove near the distribution fan works well

because the sensor monitors the room air being

drawn into the distribution fan.

NOTE: Distances of more than 25 feet from

the unit or in another room are not recommended.

The room sensor is essential for the XXV's excel-

lent efficiency.

NOTE: It is recommended that the room

sensor be installed, even if only installed on the

rear of the unit as a return air sensor.

XXV Pellet Stove