Dot1X Auth-Server - Dell S4810 Reference Manual

Table of Contents

reached. If the authentication fails after all allowed attempts, the interface is moved

to the authentication failed VLAN.

After the authentication VLAN is assigned, the port-state must be toggled to restart

authentication. Authentication occurs at the next re-authentication interval (dot1x

reauthentication).

dot1x port-control

dot1x guest-vlan

show dot1x interface

dot1x auth-server

Configure the authentication server to RADIUS.

dot1x auth-server radius

CONFIGURATION

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 7.6.1.0

Version 7.4.1.0

dot1x guest-vlan

Configure a guest VLAN for limited access users or for devices that are not 802.1X capable.

dot1x guest-vlan vlan-id

To disable the guest VLAN, use the no dot1x guest-vlan vlan-id command.

— enables port-control on an interface.

— configures a guest VLAN for non-dot1x devices.

— displays the 802.1X information on an interface.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Introduced on the C-Series and S-Series.

Introduced on the E-Series.