Ip Ssh Rekey - Dell S4810 Reference Manual

Table of Contents

Dell(conf)# ip ssh pub-key-file flash://knownhosts

show ip ssh client-pub-keys

based authentication.

ip ssh rekey

Configures the time rekey-interval or volume rekey-limit threshold at which to re-generate the SSH key

during an SSH session.

ip ssh rekey [time rekey-interval] [volume rekey-limit]

To reset to the default, use no ip ssh rekey [time rekey-interval]

[volume rekey-limit] command.

time minutes

volume rekey-

The default time is 60 minutes. The default volume is 1024 megabytes.

CONFIGURATION mode

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.5(0.0)

ip ssh rhostsfile

Specify the rhost file used for host-based authorization.

ip ssh rhostsfile {WORD}

— displays the client-public keys used for the host-

Enter the keywords time then the amount of time in

minutes. The range is from 10 to 1440 minutes. The default is

Enter the keywords volume then the amount of volume in

megabytes. The range is from 1 to 4096 to megabytes. The

default is 1024 megabytes

Introduced on the Z9000, S6000, S4820T, S4810, MXL

Enter the rhost file name for the host-based authentication.