Dell S4810 Reference Manual page 1757
Hide thumbs
Also See for S4810:
- Reference manual (1761 pages) ,
- Installing manual (58 pages) ,
- Configuration manual (17 pages)
Table of Contents
Advertisement
Version
8.3.10.0
Version 8.3.2.0
Usage
The following describes the show vrrp ipv6 command shown in the following
Information
example.
Line Beginning
with
GigabitEthernet...
VRF
State: master...
Hold Down:...
Adv rcvd:...
Virtual MAC
address
Virtual IP address
Tracking states...
Virtual Router Redundancy Protocol (VRRP)
Introduced on the S4810.
Introduced on the E-Series TeraScale.
Description
Displays the Interface, the VRRP group ID, and the network
address. If the interface is no sending VRRP packets, 0.0.0.0
appears as the network address.
VRF instance to which the interface (on which the VRRP
group is configured) belongs.
Displays the interface's state:
•
Na/If (not available).
•
master (MASTER virtual router).
•
backup (BACKUP virtual router).
the interface's priority and the IP address of the MASTER.
This line displays additional VRRP configuration information:
•
Hold Down displays the hold down timer interval in
seconds.
•
Preempt displays TRUE if preempt is configured and
FALSE if preempt is not configured.
•
AdvInt displays the Advertise Interval in seconds.
This line displays counters for the following:
•
Adv rcvd displays the number of VRRP advertisements
received on the interface.
•
Adv sent displays the number of VRRP advertisements
sent on the interface.
•
Bad pkts rcvd displays the number of invalid packets
received on the interface.
Displays the virtual MAC address of the VRRP group.
Displays the virtual IP address of the VRRP router to which
the interface is connected.
Displays information on the tracked interfaces or objects
configured for a VRRP group (track command), including:
•
UP or DOWN state of the tracked interface or object (Up
or Dn).
1757
Advertisement
Table of Contents
