Table of Contents
Advertisement
Symmetrical pattern
When programming a symmetrical pattern, program a target pattern and then select a symmetrical pattern type.
The following describes how to program a pattern symmetric to the Y axis.
Symmetrical pattern type
Symmetric to Y axis
Use the command
Symmetric to point
Use the command
1. Carry out steps 1 and 2 of "Procedure for
programming with command".
2. Create the program to point B.
Refer to "Programming for each stitch" (page 95) or
"Pattern with curves" (page 97).
3. Press
Input the symmetric to Y axis command.
.
.
.
CHAPTER 4 PROGRAMMING WITH COMMANDS
Symmetric to X axis
Use the command
Turnover
Use the command
4. The needle point moves slowly from point B to
point A in the right half and a symmetrical
pattern is automatically programmed.
Press
to move the needle point faster.
5. Carry out steps 4 to 6 of "Procedure for
programming with command".
PD-3000
.
.
101
- Quick Links:
- Instruction Manual
Hide quick links:
Advertisement
Table of Contents
