Table of Contents
Advertisement
Creating a parallel stitch
Commands to be used
1. Select the sewing start point with
and then press
.
2. Input the stitch width, and then press
.
3.
Move the needle point to the second point or
after with
Creating parallel stitch in the same direction to the sewing path Input the width of
parallel stitch in
Example: Width
1.5 mm
Input the stitch length in
Carrying out parallel stitch on the left of the sewing path
Carrying out parallel stitch on the right of the sewing path
Starting parallel stitch calculations
(This is the code to end programming. For details, refer to page 133.)
. Press
.
CHAPTER 4 PROGRAMMING WITH COMMANDS
. Values 1.0 to 9.9 mm are available for the width
Input value
315
.
4. Move the needle to the corner point and input
,
5. Repeat steps 3 and 4 and move the needle to the
end point. Then input
When the calculation is complete, the needle point
moves to the end position.
PD-3000
.
.
129
- Quick Links:
- Instruction Manual
Hide quick links:
Advertisement
Table of Contents
