Table of Contents
Advertisement
Copying a pattern symmetrically to the Y-axis
Commands to be used
1. Move the needle to the position you want to
apply the command at.
For moving the needle position, refer to "Description
of commands" (page 90).
Turnover
Command to be used
1. Move the needle to the position you want to
apply the command at.
For moving the needle position, refer to "Description
of commands" (page 90).
Moving in parallel
Commands to be used
1. Move the needle to the position you want to
apply the command at.
For moving the needle position, refer to "Description
of commands" (page 90).
2. Input
.
Copying data, from the start point or the feed point (excluding the number of feed boundaries
to be ignored) to the current needle position, symmetrically to the Y-axis based on the current
needle position
Copying data in the reverse direction from the start point or the feed point (excluding the
number of feed boundaries to be ignored) to the current needle position
Changing the moving amount of the data for the current needle position
Moving data in parallel from the current needle position (using needle drop data to the
moved position)
or
CHAPTER 4 PROGRAMMING WITH COMMANDS
2. Input
2. Input
3. Determine the moving destination point with
, and then press
PD-3000
.
.
.
141
- Quick Links:
- Instruction Manual
Hide quick links:
Advertisement
Table of Contents
