Table of Contents
Advertisement
15. Press
three times.
Adding a new sewing start point before the first stitch
A point is added before the current sewing start point to make it as the sewing start point.
The following describes how to change the sewing start point from 1 to 1'.
1. Carry out step 1 of "Procedure for modifying
program".
2. Select
with
.
3. Press
, and then press
The work clamp moves to the sewing start point.
4. Press
.
5. Select
with
.
6. Select
with
7. Move the work clamp with
the needle point is at 1' of the pattern.
Record the coordinates (values of X
8. Press
.
1' is programmed.
, and then press
.
, and then press
, and then press
.
so that
and Y ).
PD-3000
CHAPTER 3 PROGRAMMING WITH ICONS
16. Carry out steps 3 to 5 of "Procedure for
modifying program".
9. Move the work clamp with
equivalent of the coordinates value recorded in
step 5 in the opposite direction so that the
needle point is at 1 of the pattern sheet.
10. Press
.
1 is programmed again.
11. Press
twice.
12. Select
with
.
13. Press
, and then press
The work clamp moves to the sewing start point.
14. Press
.
15. Select
with
.
an
, and then press
.
, and then press
51
- Quick Links:
- Instruction Manual
Hide quick links:
Advertisement
Table of Contents
