Table of Contents
Advertisement
CHAPTER 3 PROGRAMMING WITH ICONS
Changing the height of the presser foot
The height of the presser foot is changed. Height values of -10.0 to 10.0 are available for input.
Inputting 00 cancels the setting for the height of the presser foot.
1. Select
, and then press
Changing the thread tension
The thread tension can be changed.
Thread tension levels 0 to 9 are available for input.
1. Select
, and then press
Inputting the trigger
Input the trigger for the extended option output.
Adjust the needle position before inputting the trigger and setting attribute.
Refer to "Checking the program setting and setting attribute" (page 78).
1. Select
, and then press
2. Input the number of option output.
For the number of option output, refer to "Extended option
output" (page 74).
76
2. Press the height of the presser foot, and then
press
.
2. Input a thread tension level, and then press
.
Displays the setting value of the sewing machine when the
sewing machine is connected.
.
3. Move the cursor with
specify whether to stop the machine or not.
ON: The needle stops at the upper end without thread
breakage, and restarts after output of the extended option.
OFF: Sewing does not stop.
PD-3000
.
.
, then use
to
- Quick Links:
- Instruction Manual
Hide quick links:
Advertisement
Table of Contents
