Table of Contents
Advertisement
Step
2
Your SpeedStream
2105's rear panel has five standard RJ-45 ports, plus a shared Uplink port. Each port
®
automatically detects the speed and duplex of the attached cabling to a network card, switch, hub, etc.
The ports operate in either full or half duplex mode.
Each port on your SpeedStream
routers, or other switches. Connections to the 2105 require Category 5 UTP network cabling with RJ-45
connectors, not to exceed 328 ft (100 meters) in length.
COL/FDX
Link/ACT
Power
Yellow 100M
1
2
Green 10M
Front Panel of 5-port Ethernet Switch
Cabling Guidelines
Use Category 5 UTP cabling with four pair of wires and RJ-45 connectors for all 100 Mbps connections.
Use the chart below to position your switches, hubs, and workstations.
FROM
Switch
Switch or Hub
LED Indicators
LED indicators are provided for monitoring various network conditions. A glance at the front panel
allows you to instantly monitor the status of each station port plus the overall condition of the switch.
LED
PWR
FDX/COL
LINK/ACT
Yellow
Green
Technical Support for North America is available 24 hours a day, 7 days a week, by phone, email or online:
Phone:
1-877-823-6722
Email:
support@speedstream.com
Online:
http://www.support.speedstream.com
For more information regarding SpeedStream
Efficient Networks, Inc.
A Siemens Company
4849 Alpha Road
Dallas, TX 75244
©2001 Efficient Networks, Inc. All rights reserved. Efficient Networks, its logos, "Live a Broadband Life" and SpeedStream are registered and unregis-
tered trademarks of Efficient Networks, Inc. Siemens and the Siemens logo are registered trademarks of Siemens AG, Germany. All other brand
names and trademarks are held by their respective companies. Efficient Networks reserves the right to make changes to product specifications at
any time without notice.
Hardware Description/Troubleshooting
®
2105 can connect to workstations, file servers, hubs, repeaters, bridges,
3
4
5
TO
MAXIMUM DISTANCE
Switch or Hub
328 ft (100 meters)
Workstation
328 ft (100 meters)
LED STATUS
INDICATION
On
Power indicator
On
Full duplex transfer mode
Flashing
Port has detected data collision error
Off
Half duplex transfer mode
On
100 Mbps connection is detected
Flashing
Data is sending/receiving at 100 Mbps
On
10 Mbps connection is detected
Flashing
Data is sending/receiving at 10 Mbps
12VDC 0.5A
5
4
3
Rear Panel of 5-port Ethernet Switch
®
products visit: www.speedstream.com.
2
1
Uplink
Advertisement
Table of Contents
