Instance Association - Cisco WAP131 Administration Manual
Wireless-n dual radio access point
with poe
Hide thumbs
Also See for WAP131:
- Quick start manual (13 pages) ,
- Manual (4 pages) ,
- Quick start manual (13 pages)
Table of Contents
Advertisement
Captive Portal
Instance Association
STEP 6
Instance Association
STEP 1
STEP 2
STEP 3
Cisco WAP131 and WAP351 Administration Guide
When the first wireless client tries to authenticate with a VAP, the WAP
device sends an authentication request to the primary server. If the primary
server responds to the authentication request, the WAP device continues to
use this RADIUS server as the primary server, and the authentication
requests are sent to the specified address.
•
Server IP Address (2 through 4) or Server IPv6 Address (2 through 4)—
Enter up to three IPv4 or IPv6 backup RADIUS server addresses. If the
authentication fails with the primary server, each configured backup server
is tried in sequence.
•
Key-1—Enter the shared secret key that the WAP device uses to
authenticate to the primary RADIUS server. You can use up to 63 standard
alphanumeric and special characters. The key is case sensitive and must
match the key configured on the RADIUS server. The text that you enter is
shown as asterisks.
•
Key-2 to -4—Enter the RADIUS key associated with the configured backup
RADIUS servers. The server at Server IP Address-1 uses Key-1, Server IP
Address-2 uses Key-2, and so on.
•
Locale Count—Shows the number of locales associated with the instance.
You can create and assign up to three different locales to each CP instance
from the Web Customization page.
•
Delete Instance—Check to delete the current instance.
Click Save. Your changes are saved to the Startup Configuration.
After you create an instance, use the Instance Association page to associate a CP
instance to a VAP. The associated CP instance settings applies to users who
attempt to authenticate on the VAP.
To associate an instance to a VAP:
Select Captive Portal > Instance Association.
Choose the radio that you want to configure.
Choose the instance name for each VAP to which you want to associate an
instance.
10
163
Hide quick links:
Advertisement
Table of Contents
