Cisco ASR 5000 Series Installation And Administration Manual page 30

External

Hide thumbs Also See for ASR 5000 Series:

Table of Contents

▀ Configuring Storage Array

Step 33

Select Change Host LUN Assignments.

Step 34

From Select Host Channel and SCSI ID, select Phy Ch 1(SCSI) – PID 0. Under Partitions, select LD 0, then click

Assign Host LUN, and OK.

Step 35

Repeat the same for Phy Ch 3(SCSI) – PID 3, and assign LD 0 to it.

Step 36

Click Custom Configure on the Configuration menu.

Step 37

Select Change Controller Parameters.

Step 38

Click on Network tab of the Change Controller Parameters screen, and then click Change Settings.

Step 39

Enter the IP address for the array, and subnet mask, then click OK.

Step 40

Click Custom Configure on the Configuration menu.

Step 41

Select Make or Change Standby Drives.

Step 42

Click the radio button next to, Local Standby for LD#, and make sure that the popup has 0 shown, then click Apply.

▄ Cisco ASR 5000 Series External Storage Server Installation and Administration Guide

Veritas Cluster Installation and Management

OL-22979-03

Table of Contents

Troubleshooting