Controlling A Ptz Camera; Toggling Between Zonal Mode And Pull Mode; Figure 2-11 Ptz Control Options - Honeywell Rapid Eye Operator's Manual
Remote view
Hide thumbs
Also See for Rapid Eye:
- Administrator's manual (294 pages) ,
- System administration manual (292 pages) ,
- System administrator manual (264 pages)
Table of Contents
Advertisement
Controlling a PTZ Camera
TIP!
Toggling Between Zonal Mode and Pull Mode
PTZ Control
options
Document 800-07767 Rev A
02/11
Three PTZ controls are available to make PTZ commands: a dartboard-like control, a
rubber band control, and a Zonal Mode control. All three options are available while running
a Live session or while using LocalView.
The rubber-band control and zonal mode PTZ control cannot be used at the same
time.
Caution
Not all PTZ cameras support every PTZ command offered. See your PTZ
camera's documentation for more information on its features.
Globally and for New Players
1.
Open the View menu on the View application (not the Live session).
2.
Select Options and click New Players.
3.
In the Options for New Players window, select Zonal Mode (see
zonal mode is then set to be used in all new Live players, instead of the PTZ Pull
Mode. If needed, select the Pull Mode in the same way.
Figure 2-11
PTZ Control Options
Temporarily and for One Session
1.
In a Live player, select a PTZ camera.
2.
In the View menu, select Options.
Rapid Eye Remote View Operator Guide
Figure
2-11). The
41
Advertisement
Table of Contents
Troubleshooting
